Home >> Produtos >> Multiseriais >> PCI  >> CP-132
CP-132
          Placa Multiserial PCI com 2 portas RS-422/485

 

 

  

Navegação Rápida
Orçamento
Documento em PDF
Produtos Relacionados
  Wireless Serial Ethernet
  Ethernet Fiber Converter
  Industrial Gateway
Índice Multiseriais
Retornar
 

     Orçamento       Retornar

Apresentação

The CP-132 Series of 2-port serial boards is designed for RS-422/485 industrial communication. CP-132 serial boards support 2 independent RS-422 or RS-485 ports, with each port able to control up to 32 devices in a multidrop environment. This series of PCI 2-port serial boards provides a reliable communication link (RS-422/485) over a longer distance (up to 4000 ft), and is suitable for industrial environments.

By using ADDC™ (Automatic Data Direction Control) intelligence, applications can easily manage half-duplex RS-485 port's data transmission and receiving without the need for writing extra code. In addition, on-chip hardware flow control and built-in termination resistors guarantee data integrity, and optical isolation and surge protection options are also available to deliver high reliability. All of the above attributes make the CP-132 Series of multiport serial boards suitable for harsh industrial applications.

  • 2-port RS-422/485 high speed communication board

  • Compact PCI board size

  • Works perfectly with all major operating systems

  • Various connection options

  • Data transmission speed up to 921.6 Kbps

  • On-chip hardware flow control

Benefits

  • High reliability in harsh industrial environments

  • ADDC™ intelligence simplifies RS-485 software programming, reducing developing time and cost

Applications

  • Multipoint data acquisition

  • Industrial control

  • Factory automation

  • Embedded industrial machines

  • Remote serial device control

  • SCADA systems

Specification

 

Hardware

I/O controller

16C550C or compatible x 2

Connector type

Male DB9

 

Interface

Bus

32-bit PCI, ver. 2.1

No. of ports

2

Signals

RS-422: TxD+, TxD-, RxD+, RxD-, RTS+, RTS-, CTS+, CTS-, GND
2-wire RS-485: Data+, Data-, GND

RS-485 data control

Auto ADDC™ or by RTS

Built-in termination resistor

RS-422: 120 Ohm
2-wire RS-485: 120 Ohm, jumper enabled

 

Performance

Speed

50 bps to 921.6 Kbps

Max. No. of ports

8 (4 boards)

 

Configuration

Parity

None, even, odd, space, mark

Data bits

5, 6, 7, 8

Stop bits

1, 1.5, 2

IRQ

Assigned by BIOS

I/O address

Assigned by BIOS

 

Operating Systems

CP-132
CP-132S
CP-132I
CP-132IS

Windows 2000/XP/2003, Windows NT, Windows 95/98/ME, Windows XP Embedded, DOS, FreeBSD 4.x, Linux 2.0.x (Alpha), Linux 2.2.x (Alpha), Linux Base

 

Power and Environment

Power Requirements

CP-132: 430 mA max. (+5V)
CP-132S: 430 mA max. (+5V)
CP-132I: 700 mA max. (+5V)
CP-132IS: 700 mA max. (+5V)

Operating Termperature

0 to 55°C

Operating Humidity

5 to 95% RH

Storage Temperature

-20 to 85°C

Dimensions (W x D)

120 x 80 mm (CP-132, CP-132S)
120 x 110 mm (CP-132I, CP-132IS)

Surge Protection

25 KV ESD per serial port (CP-132S, CP-132IS)

Optical Isolation

2 KV (CP-132I, CP-132IS)

Regulatory Approvals

FCC, CE

 

Modelos

CP132

Placa multiserial PCI de 32 bits com 2 portas RS-422/485 conector DB9 macho Baud Rate de 50 a 921,6 kBPS. 

CP132S

Placa multiserial PCI de 32 bits com 2 portas RS-422/485 conector DB9 macho Baud Rate de 50 a 921,6 kBPS. Proteção contra surtos de 25 kV ESD

CP132I

Placa multiserial PCI de 32 bits com 2 portas RS-422/485 conector DB9 macho Baud Rate de 50 a 921,6 kBPS. Isolação otica de 2 kV

CP132IS

Placa multiserial PCI de 32 bits com 2 portas RS-422/485 conector DB9 macho Baud Rate de 50 a 921,6 kBPS. Isolação otica de 2 kV  Proteção contra surtos de 25 kV
 


Aliansa Brasil  Tel.: (11) 6781-7293

info@aliansabrasil.com.br