Home >> Produtos >> Conversores >> Serial Ethernet  >> Modbus  >> NPort6110
NPort 6110
          Gateway Ethenet para RS-232/422/485 Modbus

 

 

  

Navegação Rápida
Orçamento
Documento em PDF
Produtos Relacionados
  Wireless Serial Ethernet
  Ethernet Fiber Converter
  Industrial Gateway
  Switch Industrial
   24 Vdc Power Supply
Índice Modbus
Retornar
 

Documento Completo      Orçamento       Retornar

Apresentação

Seamless Integration for Ethernet and Serial Modbus Devices

Modbus is one of the most popular automation protocols in the world. Modbus protocol supports traditional RS-232/422/485 devices and newly developed Ethernet devices. Many industrial devices, such as PLCs, DCSs, HMIs, instruments, and meters, use Modbus as their communication standard. However, the Modbus protocol running over serial and Ethernet are so different that a communication gateway is needed as a bridge for integration.

 

NPort 6110 supports one Ethernet and one software selectable RS-232/422/485 port that can connect with all kinds of Modbus devices. By translating Modbus/TCP (Ethernet) and Modbus /ASCII/RTU (Serial) protocols, a PLC with Ethernet can use the RS-232/422/485 interface to seamlessly communicate with instruments.

Powerful Operation Modes for Versatile Modbus Applications

For Modbus protocol conversions, it is necessary to define a Master and Slave device, but unlike other Modbus Gateways, NPort 6110 allows users to configure Master/Slave for both the Ethernet and serial sides. Extra address mapping and exception parameters are supplied to ensure that most situations can be handled.

Windows Utility For Easy Setup and Traffic Monitoring

NPort 6110 is powerful yet very easy to use. An intuitive Windows utility automatically searches for all available NPort 6110 units on the LAN. Traffic monitoring within the utility helps you troubleshoot any Modbus communication problem, such as connection status check, or address translation error check.

  • Modbus serial and Ethernet device integration

  • Supports Modbus/TCP Master device to link Modbus/ASCII/RTU slave devices (up to 31)

  • Supports Modbus/ASCII/RTU master device to link Modbus/TCP slave devices (up to 12)

  • Easy-to-use Windows utility for configuration over Ethernet

  • 10/100M fast Ethernet with automatic IP setting (DHCP)

  • One software selectable RS-232/422/485 interface

  • High speed serial up to 230.4 Kbps

Especificações

LAN

Ethernet

10/100 Mbps, RJ45, Auto MDI/MDIX

Protection

Built-in 1.5 KV magnetic isolation

 

Serial Interface

Interface

RS-232/422/485, software selectable

No. of Ports

1

Port Type

Male DB9

Signals

RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-, GND
2-wire RS-485: Data+, Data-, GND

Serial line protection

15 KV ESD for all signals

RS-485 data direction

Patented Automatic Data Direction Control (ADDC™)

 

Serial Communication Parameters

Parity

None, Even, Odd, Space, Mark

Data bits

7, 8

Stop bit

1, 2

Flow control

RTS/CTS, XON/XOFF

Transmission Speed

1200 bps to 230.4 Kbps

 

Software Features

Internet Protocols

DHCP, BOOTP, TCP, UDP, IP, ICMP, ARP

Modbus Protocols

Modbus/TCP, Modbus/ASCII, Modbus/RTU, Master/Slave modes supported

Utilities

Modbus Gateway Configurator for Windows 95/98/ME/NT/2000/XP/2003

Configuration

Windows Utility via Ethernet

 

Power Requirements

Power Input

9 to 30 VDC

Power Consumption

300 mA (at 12V max.)

 

Modelos

NPort6110

Gateway Ethernet.Modbus RS-232/422/485. Protocolos Modbus/TCP, Modbus/ASCII, Modbus/RTU, suporta modos Master/Slave . DHCP, BOOTP, TCP, UDP, IP, ICMP, ARP  Alimentação de 9 a 30 VDC
 


Aliansa Brasil  Tel.: (11) 6781-7293

info@aliansabrasil.com.br